This site uses cookies to provide you with a personalized experience for your visit. These cookies allow computers to be identified but are not related to a person. If you wish to use our website in full functionality, please accept the cookies.

Accept the cookies
Herz Oxford HIU
Feel the Water

Herz Oxford HIU

                                               

The Herz Oxford DHW only HIU is suitable for all community schemes and enables LTHW from a central plant to provide DHWS to each dwelling with complete hydraulic separation between the LTHW primary and the DHW systems.

The HIU is a complete package comprising of all components mounted on a frame, factory assembled and tested.

Functions

Domestic hot water is generated via the DHW heat exchanger mounted in the HIU and provides instantaneous hot water on demand.

The temperature of the DHW is controlled by a thermostatic head with an immersion sensor, this head controls the temperature of the hot water that exits the heat exchanger and regulates the primary water flowrate.

When a hot water tap is opened the drop in pressure in the hot water pipe will open the 4 port pressure temperature control valve which in turn will allow primary hot water into the heat exchanger.

When the hot water demand ceases the pressure temperature control valve will immediately stop the primary flow into the heat exchanger. Therefore there is no drain on the primary heating when there is no demand, so no “extra energy usage” when residents are on holiday for example.

A thermostatic circulation bypass valve is fitted to maintain a minimum primary temperature when there is no demand for hot water and the heat exchanger is not in use. This provides a quick DHW response and avoids unnecessary energy usage for the occupier.

Presure Temperature Control Valve

As a hot water tap is opened the pressure temperature control valve reacts to the difference in pressure via a diaphragm and opens allowing the cold and primary heating water to flow through the heat exchanger. At the same time, a hot water priority valve closes the primary feed to the secondary heat exchanger, thus ensuring maximum flow is available at the domestic heat exchanger. In order to prolong the life of the DHW heat exchanger and prevent lime scale build up, the temperature of the domestic hot water is controlled by a thermostat fitted to the pressure temperature control valve. Using an immersion sensor, this thermostat controls the temperature of the hot water that exits the heat exchanger and regulates the pressure temperature control valve thus maximising the energy efficiency of both the HIU and the primary system.

Thermostatic "Summer" Bypass Valve

The ”Summer bypass” valve utilises a return temperature limiter head fitted to a thermostatic valve installed in a bypass between the primary flow and return pipework within the HIU. This maintains a minimum primary temperature when the heat exchanger is not in use and ensures a quick response time at the hot tap. The thermostatic bypass valve is installed upstream of the heat meter. Combined with the Pressure Temperature Control Valve, which only allows water through the DHW heat exchanger when there is a demand, ensures that it is impossible to have meter creepage or standing losses from the Herz Oxford HIU.

HIU Ball Valves

The Herz Oxford HIU is fitted with special ball valves designed specifically for the purpose. The ball valves are delivered fitted to the HIU but can be removed and installed at first fix if required. The HIU ball valves are fitted with drain valves to facilitate draining with integral test points fitted on the primary flow and return valves to aid additional temperature or pressure measurement if required. The ball valves have union connections for convenience and to allow the HIU to be easily removed for servicing.

Flushing Bypass

The Herz Oxford HIU can be fitted with a Herz HIU flushing bypass, this is a custom made valve designed to facilitate the flushing of the primary system without the water circulating through the HIU as recommended in BSRIA Guide BG 62/2015. The flushing bypass valve can be connected directly to the HIU ball valves at first fix so that primary flushing can be carried out before the HIU is fitted.

Dual Orientation

The Herz Oxford HIU has been designed so that it can be installed with the ball valve connections at the top or at the bottom. The fully insulated cover will fit onto the HIU regardless of the installed orientation. An optional ball valve cover is available if required, this can be fitted to the top or bottom of the cover as appropriate to the orientation of the HIU.

Other Features

Instantaneous hot water to properties

Low primary return temperature maximises system efficiency

Fully insulated cover and back board

Option for heat meter (110mm Spool piece provided as standard)

Option for water meter (110mm Spool piece provided as standard)

WRAS approved products utilised where required

18mm stainless steel pipe work

Lockable cover with security fixing screw

Dual orientation for ease of connection

Optional ball valve cover available if required

Oxford HIU Data Sheet

Oxford HIU BIM File

Oxford HIU Specification

New Product

HERZ Air- and Dirtseparator

The HERZ Air- and Dirtseparator, made of DZR-brass, serparates mud particles and air from heating- and cooling-systems

More

News

Deutschland: Zwei Milliarden Euro für Heizungsoptimierung

HIRSCH erwirbt drei Werke in Rumänien | Spannungsrisskorrosion bei Messingarmaturen | ersten Pelletskessel mit Brennwerttechnologie

More

HOME_NEW

Herz News

Have a look at the latest news from Herz!

More